Electronic Components
Electronic Components are essential for a wide range of applications, from consumer electronics to industrial machinery. With the ever-increasing demand for electronic components, buying from China is one of the best options for those looking for quality components at the most competitive prices. As one of the world’s leading suppliers of electronic components, China offers a huge selection of products, from basic components to the latest advances in technology.

Whether you’re looking to buy electronic components in bulk or just a few pieces, China has the supplies you need. With a wide range of components available, you can find the perfect match for your project. From capacitors and resistors to integrated circuits and transistors, China has the electronic components you need to get the job done.

China also offers a variety of customization options to meet your specific needs. For those looking for the best deals, buying electronic components from China is the way to go. With unbeatable prices and unbeatable quality, you can rest assured that you’re getting the best components for your project.

RTD Temperature Sensor

(8)

RTD Air Water Temperature Sensor

The platinum resistance temperature sensor is a thermometer that measures temperature by adjusting its resistance. The resistance-temperature polynomial function R expresses the standard relationship between resistance and temperature, which is supplied in the form of a graduated table because the characteristic curve of the platinum resistor is non-linear (t).

Контактирајте нас

Platinum Resistance Temperature Sensor For Heat Meter

The precision of each pair of temperature probes after pairing may meet the error of 0.1°C, and each pair of temperature sensors for the heat meter series industrial temperature sensors conforms to the criteria of Chinese standard CJ 128-2007 and European standard EN 1434 in terms of error range. To avoid MIS installation due to the length of the cable, the two ends of the probe are each marked with a red and blue marker. Upper water is at the red end, while lower water is at the blue end.

Контактирајте нас

4 Wire Platinum Resistance Temperature Sensor For BBQ Oven

The product has excellent characteristic stability and consistency, high-temperature measuring accuracy, wide temperature measurement range, good moisture resistance, and high reliability.

Контактирајте нас

2 Wire 3 Wire RTD Platinum Resistance Temperature Sensor For New Energy

The Y60 series platinum resistance sensor uses two-wire or three-wire silver-plated Teflon wire, which offers high-temperature measurement precision and strong dependability. This series is packaged in 304 stainless steel or PTFE Teflon rubber.

Контактирајте нас

Thermocouple Temperature Sensor

(4)

K Type Thermocouple Temperature Sensor For Scientific Biological Research Field

The Seibel effect is the basis for the thermocouple temperature sensor, which measures temperature. Current will flow through a closed loop formed by the two separate homogeneous conductors A and B when there is a temperature differential (T-T0) between the ends of the loop. By sensing the potential created by the current, the thermocouple temperature sensor determines the temperature of the hot spot being monitored.

Контактирајте нас

K-Type Thermocouples For Grill And Industrial Equipment

One of the popular types of sensing components used to measure temperature in industrial applications are thermocouple temperature sensors. They are chosen from a variety of sensors, including semiconductors, resistance thermometer detectors, and thermistors (RTDs).

Контактирајте нас

K-Type Thermocouples For Thermometers

The most often used temperature sensors are thermocouple devices. This is due to the fact that thermocouples exhibit steady performance, a broad temperature measuring range, long-distance signal transmission, etc. They also have a straightforward structure and are simple to operate. Thermocouples make display, recording, and transmission simple by directly converting thermal energy into electrical impulses.

Контактирајте нас

K-Type Industrial Oven Thermocouple

A loop is created by joining two wires with various components (known as thermocouples wire or thermodes). The pyroelectric effect is a phenomena where an electromotive force is produced in the loop when the junction's temperature varies. The thermoelectric potential, often known as the Seebeck effect, is the name given to this electromotive force.

Контактирајте нас

DS18B20 Digital Temperature Sensor

(6)

Digital Temperature Sensor For Boiler, Clean Room And Machine Room

The DS18B20 does not require an external power source to function. The device is powered when the data line DQ is high. The internal capacitor (Spp) charges when the bus is pulled high, and the capacitor powers the device when the bus is pulled low. "Parasitic power" is the term used to describe this method of 1-Wire bus device powering.

Контактирајте нас

Greenhouse Temperature Sensor

The temperature readings from the DS18B20 temperature sensor are 9-bit (binary), suggesting that the device's temperature data is either sent to the DS18B20 temperature sensor via the single-line interface or that it is sent out from the DS18B20 temperature sensor. As a result, just one line (plus ground) is required to connect the host CPU to the DS18B20 temperature sensor, and the data line itself can act as the sensor's power source in place of an external power source.

Контактирајте нас

Digital Temperature Sensor For Cold -Chain System Granary And Wine Cellar

The DS18B20 is a popular digital temperature sensor with the features of small size, minimal hardware overhead, strong anti-interference capabilities, and high precision. It outputs digital signals. The DS18B20 digital temperature sensor is simple to wire and is packaged in a variety of ways, including pipeline, screw, magnet adsorption, stainless steel, and numerous model options.

Контактирајте нас

1-Wire Bus Protocol Temperature Sensor For Robot Industrial

The 1-Wire bus protocol, which is utilized by the DS18B20, only needs one control signal for communication. To avoid the bus port being in a 3-state or high-impedance condition, the control signal line needs a wake-up pull-up resistor (the DQ signal line is on the DS18B20). The microcontroller (master device) in this bus system recognizes the bus's devices by their 64-bit serial numbers. A bus may potentially support a limitless number of devices because each one has a distinct serial number.

Контактирајте нас
Контактирајте нас
Name

Name can't be empty

* Email

Email can't be empty

Phone

Phone can't be empty

Company

Company can't be empty

* Message

Message can't be empty

прихвати
ТАГС ПРОИЗВОДА